
We pull the firefighting water, dry the structure, and kill the smoke odor.
Water Damage Restoration After Firefighting in west palm beach
Water Damage Restoration After Firefighting in west palm beach is the work that starts the moment the hoses stop. Fire crews leave 300 to 2,000 gallons of water inside your walls, ceilings, and floors, and that water starts feeding mold within 24 to 48 hours. We extract it, dry the framing, and deodorize the soot in the same visit. Call us at +15615627610.
What's included
What Water Damage Restoration After Firefighting Includes
Every post-fire water job we run in west palm beach includes the full sequence from emergency extraction through deodorization and documentation. Here is what is covered on a standard scope, and where add-ons like reconstruction or content pack-out come into play.
Emergency Water Extraction
Truck-mount extractors pull standing firefighting water from floors, carpets, and low areas. We remove 300 to 2,000 gallons in a typical west palm beach home, then check the same rooms with moisture meters to confirm nothing was missed under baseboards or inside floor cavities.
Moisture Mapping and Documentation
Thermal imaging cameras and penetrating moisture meters show where firefighting water traveled behind walls and under floors. You get a marked moisture map, photo log, and daily readings, which become the backbone of your insurance claim and the dry standard we work toward.
Soot and Residue Removal
HEPA vacuums and soot sponges pull char and residue off walls, ceilings, and salvageable contents before drying starts. Wet soot stains faster than dry soot, so this step happens in the first 24 hours, along with protecting countertops and fixtures from further damage.
Structural Drying
Air movers and dehumidifiers dry framing, drywall, and subfloor to a documented dry standard over 3 to 5 days for most west palm beach homes. We check readings every 24 hours and do not pull equipment until the numbers hold for two consecutive days.
Deodorization and Air Treatment
Hydroxyl generators, ozone treatment, and charcoal filters neutralize smoke odor in the air and inside ductwork. Most homes need 24 to 72 hours of treatment after drying, and we test the air before we call the job complete.
Insurance Claim Documentation
We photograph every affected room, log moisture readings, and build an Xactimate scope your adjuster can process. If you need insurance claim assistance for fire damage, we sit in on the adjuster visit and answer technical questions about firefighting water and soot.
Service overview
What Water Damage Restoration After Firefighting in west palm beach Actually Involves
Water Damage Restoration After Firefighting in west palm beach is the combined water, soot, and odor cleanup that follows a fire call. Firefighting water carries ash, char, and fire-suppression chemicals into drywall, insulation, lumber, and ductwork. We extract standing water with truck-mount units, map hidden moisture with thermal imaging cameras and moisture meters, then dry the structure with air movers and dehumidifiers until readings match a dry standard. Soot sponges and HEPA vacuums handle the residue the water left behind.
In west palm beach, this work is urgent for a specific reason: our humidity sits between 70 and 85 percent most of the year, and mold can colonize wet drywall in under 48 hours. A kitchen fire in Westgate or an electrical fire in El Cid that gets doused at 2 a.m. can be growing mold by the next evening. If you are searching for water damage cleanup after a house fire near me, the clock is already running. We treat every fire loss as a water loss first, then a smoke loss second.
The service timeline
Our Post-Fire Water and Soot Process
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Call and Board-Up
You call +15615627610 and we roll a crew to your west palm beach address, usually within 60 to 90 minutes for emergencies. We tarp the roof, board windows, and shut off utilities if the fire marshal has not already done it. This stops rain and intruders from adding to a loss that is already open.
Water Extraction and Moisture Mapping
We pull standing water with truck-mount extractors, then walk the house with thermal imaging cameras and moisture meters to find water hiding behind walls, under floors, and inside ceiling cavities. You get a marked-up moisture map showing exactly where the firefighting water traveled, which becomes the backbone of your claim.
Soot and Residue Removal
Before drying equipment goes in, we HEPA-vacuum surfaces and wipe char and soot residue with soot sponges and dry-chem sponges. Wet soot stains faster than dry soot, so this step happens in the first 24 hours. We protect countertops, fixtures, and any salvageable contents as we work.
Structural Drying
We set air movers and dehumidifiers to dry the framing, drywall, and subfloor to a documented dry standard, checking readings every 24 hours. A typical west palm beach fire loss takes 3 to 5 days. We do not pull equipment until the numbers hold, because pulling early is how mold gets a foothold.
Deodorization and Handoff
We run hydroxyl generators, ozone treatment, and charcoal filters to neutralize smoke odor in the air and inside ductwork. Then we hand you a complete file: photos, moisture logs, an Xactimate scope, and a written summary your adjuster can work from. If reconstruction is needed, we schedule it before we leave.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Cameras
Find firefighting water hiding behind walls, under floors, and inside ceiling cavities without cutting open every surface. We use them on the first walkthrough and again on the final check.
Moisture Meters
Penetrating and non-penetrating meters confirm what the thermal camera suggests and give us the daily readings that define the dry standard for your claim file.
Truck-Mount Extractors
Pull standing firefighting water from carpet, hardwood, and low areas fast. A typical west palm beach home holds 300 to 2,000 gallons after a fire call.
Air Movers and Dehumidifiers
Dry framing, drywall, and subfloor to a documented standard. A 1,200-square-foot home usually needs 12 to 18 air movers and 3 to 4 dehumidifiers running for 3 to 5 days.
Hydroxyl and Ozone Generators
Neutralize smoke odor in the air and inside ductwork after the water is out. Most homes need 24 to 72 hours of treatment, and we test the air before finishing.
HEPA Vacuums and Soot Sponges
Remove char and soot residue from walls, ceilings, and salvageable contents before drying starts. Wet soot stains faster than dry soot, so this happens in the first 24 hours.
Negative Air Machines and Air Scrubbers
Contain soot particles and odor compounds during demolition and drying so they do not spread to unaffected rooms or the HVAC system.
Use cases
When You Need This Service
These examples show how the service framework adapts rather than forcing every call through one repair.

El Cid Electrical Fire Wall Cavity
An electrical fire inside a wall of an El Cid home left firefighting water in two rooms that looked dry. The homeowner was ready to skip drying and go straight to the rebuild, which would have trapped moisture behind new drywall. → Thermal imaging found water in the wall cavity and under 180 square feet of hardwood. We dried in place for 5 days, cleaned the soot from the adjacent rooms and ductwork, and handed the homeowner a claim file with daily readings. No mold developed.
Clematis Street Storefront Overnight Dry
A storefront fire in the Clematis Street District soaked ceiling tiles and ductwork in the unit above. The property manager needed the building to stay open and the commercial carrier needed documentation fast. → We worked overnight to extract water, remove 240 square feet of saturated ceiling tile, clean the HVAC system, and run air scrubbers and hydroxyl generators for 48 hours. The commercial claim was approved without a second inspection, and tenants stopped smelling smoke within a week.
Problems we solve
Problems We Solve After a Fire in west palm beach
Firefighting water creates problems that do not show up on the day of the fire. These are the ones we see most often in west palm beach homes and businesses, and how we handle each one before it turns into a second loss.
Hidden water behind walls and ceilings
We walk every room with thermal imaging cameras and penetrating moisture meters to find water the eye misses. Then we dry in place with air movers and dehumidifiers wherever the framing is still sound, saving walls that another crew might tear out.
Smoke odor that returns weeks later
We remove soot residue with HEPA vacuums and soot sponges, clean the HVAC system, and run hydroxyl generators, ozone treatment, and charcoal filters. Most homes need 24 to 72 hours of treatment, and we test the air before we finish.
Mold starting before the claim is settled
We start extraction and drying the same day, regardless of where the claim stands. Our Florida Licensed Mold Assessor and Florida Licensed Mold Remediator credentials mean if mold does appear, we test and remediate it without a second contractor or a second schedule.
Contents and documents ruined by water
We pack out salvageable contents, clean and deodorize them off-site, and use freeze-drying and specialized cleaning for documents and electronics. You get a real chance at keeping tax records, photos, and devices that looked ruined on the night of the fire.
How much does water damage restoration after firefighting cost in west palm beach?
Most west palm beach firefighting water jobs run $2,500 to $8,500 in 2026, with larger homes or commercial losses going higher. The range depends on how many rooms took water, whether drywall and insulation have to come out, and how long drying takes. Insurance usually covers the whole scope when the loss is tied to a covered fire claim, and we document everything in Xactimate so your adjuster can process it.
How long does water damage restoration after firefighting take?
Plan on 3 to 5 days for drying in a typical west palm beach home, plus 1 to 2 days for extraction, soot removal, and deodorization at the front end. Larger losses or homes with tile and hardwood can run 7 to 10 days. We log moisture readings every 24 hours and do not pull equipment until the structure hits a documented dry standard.
Can mold grow after a house fire in Florida?
Yes, and it often does. West palm beach humidity sits between 70 and 85 percent most of the year, so wet drywall and insulation can grow mold in under 48 hours. That is why we treat every fire loss as a water loss first. If mold growth after fire shows up, our Florida Licensed Mold Assessor and Florida Licensed Mold Remediator credentials let us test and remediate without bringing in another contractor.
Does homeowners insurance cover water damage from firefighting?
In most cases, yes. Water damage from firefighting is considered part of the fire loss, so it falls under the same claim as the smoke and char damage. We photograph every affected room, log moisture readings, and build an Xactimate scope so your adjuster has what they need. If a line item gets questioned, we walk them through the technical side on a call.
Ready when you are
Get Water Damage Restoration After Firefighting in west palm beach Now
Every hour the firefighting water sits, mold gets closer and the repair bill climbs. Call +15615627610 and we will roll a crew to your west palm beach address, extract the water, and start drying the same day. Licensed, insured, and documented for your insurance claim.

Talk with the local team
Request Water Damage Restoration After Firefighting
Reach us any hour at +15615627610. A live dispatcher takes your address, the extent of the fire, and whether the structure is safe to enter, then sends the nearest crew. Most west palm beach addresses see a truck within 60 to 90 minutes.


